Coval Plastic Coat

Coval Plastic Coat is a durable protective coating for all kinds of plastic and vinyl. It restores color and protects from stains, UV, and oxidization; creating a hard, nonporous, molecularly bonded surface. Plastic Coat, like all Coval products, helps protect from graffiti. In normal circumstances this coating is good for about one year, after which it can be re-coated. (See instructions)

Note: This product is not suitable for smooth high density polyethylene or polypropylene.

Note: For improved performance in high wear areas, mix 1 part Coval Quick Seal & Enhance to 5 parts Coval Plastic Coat. This mix also allows for easy re-coating and touch-ups.

Test: As with all Coval products, it is recommended to test for compatibility in a small area before full application.

Application

Surfaces must be clean, dry and free of waxes. Use Coval Step #1 Cleaner for Painted Surfaces and then rinse with water. Allow to dry thoroughly. Mask off all areas not to be covered, and provide adequate ventilation. Stir well, before and during application, to maintain suspension of nanoparticles. Plastic Coat is best applied with a HVLP (high-volume-low-pressure) spray system, with a 1.0-1.3 size tip and the pressure set at approximately 25 to 30 psi. Clean-up immediately with acetone.

Note:All equipment must be chemical and acetone resistant.

Caution: A professional spray mask should be used with this product, as well as eye protection, rubber gloves, and coveralls.

Maintenance

Wash with soap and water, or use Coval Step #3 Safe Clean.

Coval Plastic Coat - Specifications

Uses Seals, restores and protects all types of plastic and vinyl from stains, UV, and abrasion.Surface protection (Does not work on smooth high density polyethylene or polypropylene.) 
Suitable surfaces Auto interiors, vinyl out door seating, awnings, etc. (Does not work on smooth high density polyethylene or polypropylene.)
Applications Spray (HVLP) or ultra-smooth high density roller 1.0-1.3 tip and 25 to 30 psi.
Solvent based YES  
Water based NO  
Flammable YES  
Voc"s 20 g/l VOCs
Coverage (this is a one coat product) 800-1200 sq. ft. per gallon
Clean-up While soft: Acetone. When hard: none
Dry time Touch dry: 1½-4 hours Full Cure: 7 Days Note: It is important to protect surface from water or rain for at least 5 hours after application.
Application Method
Other relevant Coval products Coval Quick Seal & Enhance Coval Vinyl Floor Coat Coval Step #1 Cleaner for Painted Surfaces
Sheen n/a
Porosity Non-breathable
Flash point
Ambient temp and humidity limits 45° F to 105° F working limit. Safe Relative Humidity: 90% or less

WARNING: Always use appropriate protection when using Coval products; including appropriate respirator,safety goggles, butyl-rubber gloves and coveralls; also, mask off or cover, all adjacent areas.

Subscribe now to receive industry information, relevant news and special updates.

We respect your privacy.